Pilot Rock RJ Thomas Mfg. Co.

XT Series Side Accessible Picnic Table - Using Aluminum

Please make the following configuration choices:

Frame Finish

Select the finish you want on the frames.

MATERIAL & LENGTH CHOICES

Select the Material and Length you want for this product.

($932.00)
($1,098.00)
($1,479.00)
($1,649.00)
($932.00)
($1,098.00)
($1,479.00)
($1,649.00)
  • Price Per Unit Starts At:
    $932.00

Model XT Side Accessible Picnic Tables are designed and constructed specifically for heavy use areas where unusually difficult service may be required.  A section of seating is removed from the side(s) for ADA COMPLIANT wheelchair accessibility right in the middle of activities.  Table configurations meet or exceed current ADA guidelines for wheelchair access to picnic tables.

Specifications:

Model XT Side Accessible Picnic Tables feature our non-tip, non-trip, walk through design.  The table won’t tip even if all persons sit on one side.  Easy walk through access.  “Skid” design permits movement without damage to turf. 

Model XT 6 and 8 ft. Side Access Picnic Tables provide one side opening with 2 one-person seats located on either side of wheelchair.  These tables can comfortably seat 6-7 people. 

Model XT 10 and 12 ft. Side Access Picnic Tables provide two locations for wheelchairs which are diagonally opposite each other.  Current ADA guidelines require two wheelchair spaces on these larger tables.  Each side includes a shorter one-person seat plus a longer seat to accommodate 3-4 people.  These tables can comfortably seat 10-12 people.

Model XT Side Accessible Tables offer 30” nom. table height (to top of table); 18” nom. seat height.  Diagonal braces are used to support and reinforce the table structure.  Brace positioning allows wheelchair spaces to meet current ADA clearance guidelines of 30" wide, 27" under table (ground to bottom of table top), and 24" total knee and toe clearances (19" knee + 5" toe).

FRAME: All welded 2-3/8" OD steel pipe end frames (2.375" OD, 11 ga. wall, 2" ID nom. pipe specifications).  Top/seat mounting brackets are 2" x 2" x 10 ga. die-formed steel angles.  Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel.  All 3/8" dia. galvanized carriage bolt fasteners.  Warranted for life.

FINISH: Standard finish: hot dip galvanized after fabrication.  Or choose a powder coat finish (in place of galvanized finish) in your color choice.

LENGTH: 6, 8, 10 or 12 ft lengths.

TOP/SEAT MATERIALS:  2” X 10” (nom.) aluminum planks, top is pre-assembled at the factory.  Aluminum is available with clear anodized finish or in your color choice of powder coat paint finish.  See Material Options.

OPTIONAL: To anchor table to a concrete surface, use Model ANC6-4 Anchor Kit (Concrete Screws) and Model ANG-3 Anchor Kit (Anchor Straps).

You May Also Like

Campfire Rings
Accessible Campfire Rings
Accessible Campfire Rings
SKW: Accessible Campfire Rings
These Campfire Rings are designed to meet ADA guidelines for accessiblity. CLICK TO SEE MORE.
Charcoal Grills
Accessible Charcoal Grill - ASW and ASWS Series
Accessible Charcoal Grill - ASW and ASWS Series
SKW: ASW::
These charcoal grills meet the ADA guidelines for accessibility and operability. CLICK TO SEE MORE.
Trash & Recycling Receptacles
Round Receptacle - Side Door, Steel Strap
Round Receptacle - Side Door, Steel Strap
SKW: CN-R/SS2
The side door provides easy access to the liner inside.
Website design and development by Spindustry Digital, Des Moines, Iowa