The FS Series Campfire Rings combine a single level cooking grate with our flanged fire ring – an economical design when cooking over the fire might be a lower priority.

Fire ring is rolled from a 3/16" thick steel plate with an integral formed 1" wide flange around top edge.  This flange provides extra strength against heat warpage and eliminates a vertical edge.  Draft holes are provided for fire ventilation.

290 sq. inch single level cooking grate is hinged to the campfire ring and remains permanently attached.

Model FS-48 Series Campfire Ring features a 46” inside diameter and is available in three different side heights of 7-3/8”, 9”, and 11-3/8”.

FS Series fire rings include pin anchors (/PA) to keep the campfire ring secured in one place, but do not allow for tip back.  These pins must be set in concrete.

Cooking grate adjustment handles, made from 3/4" dia. steel, reach outside of the firering, away from the fire.  The handle grips are 1/8" x 1/2" coiled steel bar.  The cooking grate is built using 5/8" dia. steel perimeter bars and 1/2" dia. steel grate bars.  All grate bars are welded on both sides.  The grate hinges are formed using 5/8" dia. steel bar.

OPTIONAL Anchor System:
Angle Spade Anchors (/AL) are 4 spades attached around the firering and buried in the ground. The firering cannot be tipped up.

OPTIONAL: Model S-5 Bolt-on utility shelf 

 California's Proposition 65.