The FSW Series Campfire Rings combine a single level swivel cooking grate with our flanged fire ring.  The 300 sq. inch single level Swivel Grate will move 180 degrees – from over the fire to completely out of the fire ring – for easy fire building and serving.  The handle is never over the fire. 

Fire ring is rolled from a 3/16" thick steel plate with an integral formed 1" wide flange around top edge.  This flange provides extra strength against heat warpage and eliminates a vertical edge.  Draft holes are provided for fire ventilation.

Model FSW-26 Series Campfire Ring features a 24” inside diameter and is available in a single side height of 7-3/8”.

FSW Series fire rings include tip back anchor pins (/TB) to keep the campfire ring secured in one place, but allow the fire ring to tip up for easy clean out.  These pins must be set in concrete. 

The cooking grate is a single, welded component using ½-inch dia. steel bars, mounted on a 2-3/8” OD steel tube allowing it to swivel 180 degrees.  The operator handle includes a 1/8” x ½” flat bar coiled spring grip.  All grate bars are welded on both sides.  All fire rings are finished with high temp non-toxic black enamel paint.

OPTIONAL Anchor Systems:
Angle Spade Anchors (/AL) are 3 spades attached around the firering and buried in the ground. The firering cannot be tipped up.
Tip Back Spade Anchors (/TA) are 2 spades at the rear hinge point and buried in the ground. The firering can be tipped up.

OPTIONAL: Model S-5 Bolt-on utility shelf 

 California's Proposition 65.