When you need the fire barrier only, without the cooking grate.

Our FX Series Campfire Rings provide a solid steel fire barrier, and do not include the cooking grate.

Perfect when you don’t plan to cook over the fire, but you need the barrier to control the fire, and protect the property or your landscape blocks.

The FX Series steel ring is rolled from 3/16” thick steel plate with an integral formed 1” wide flange around the top edge.  This flange provides extra strength against heat warpage and eliminates a vertical edge.  Draft holes are provided for fire ventilation.

FX-30/11 Campfire Ring has a 30-inch inside diameter, a 32" outside diameter at the top flange, and is 11-3/8" tall.

All FX Series firerings come with tip back anchor pins (TB) to keep the ring secured in one place, but allow the ring to tip up for easy clean out. The  pins should be installed in concrete footings.

OPTIONAL Anchor Systems:
Angle Spade Anchors (/AL) are 3 spades attached around the firering and buried in the ground. The firering cannot be tipped up.

Tip Back-Bolt Down Anchor Bracket (/TB-BD): this steel bracket will anchor your firering already equipped with tip back tabs (FA-30, FS-30, FSW-30, FSW/SL-30, FX-30 and L-32 series only) to an existing concrete surface. The firering will be able to tip up. The TB-BD bracket includes fasteners to attach it to the firering tabs. It does NOT include the (3) ½-inch diameter anchor bolts.  (Note: We do not recommend installation on top of concrete. But if you choose to install your firering on concrete the TB-BD anchor will secure the firering onto your concrete base.)

OPTIONAL:  Model S5 bolt on utility shelf.

 California's Proposition 65.