Model XT Picnic Tables are designed and constructed specifically for heavy use areas where unusually difficult service may be required.

Specifications:

Model XT Picnic Tables feature our non-tip, non-trip, walk-through design.  The table won’t tip even if all persons sit on one side.  Easy walk-through access.  “Skid” design permits movement without damage to turf.  Model XT Picnic Tables offer 30" nom. table height; 18" nom. seat height.

FRAME: All welded 2-3/8" OD steel pipe end frames (2.375" OD, 11 ga. wall, 2" ID nom. pipe specifications).  Top/seat mounting angles are 2" x 2" x 10 ga. die-formed steel. Frames supported by diagonal braces of 1-5/16" OD steel pipe attached to steel center channel.  All 3/8" dia. galvanized carriage bolt fasteners.  Warranted for life.

FINISH: Standard finish: hot dip galvanized after fabrication.  Or choose a powder coat finish (in place of galvanized finish) in your color choice.

LENGTH: Tables can be 6 or 8 ft.

TOP/SEAT MATERIALS: 2" x 4" formed steel channels assembled (at the factory) into seat planks and top in your choice of color.  See Material Options.

OPTIONAL: To anchor table to a concrete surface, use Model ANC6-4 Anchor Kit (Concrete Screws) and Model ANG-3 Anchor Kit (Anchor Straps).